Joined: Sun Feb 15 2009, 04:48PM
Posts: 541

Brief overview of Oper commands

*** OPER Command ***

Attempts to give a user IRC Operator status.

Syntax: OPER Example: OPER hAtbLaDe foobar234


*** WALLOPS Command ***

Sends a "Message" to all those with the umode +w. Only IRCops can send wallops,
while anyone can view them.

Syntax: WALLOPS *** GLOBOPS Command ***

Sends a global "Message" to all IRCops. Only viewable by IRCops
(unlike WALLOPS, which can be viewed by normal users).

Syntax: GLOBOPS Example: GLOBOPS Going to be akilling those clones...


*** CHATOPS Command ***

GLOBOPS is usually reserved for important network information. Therefore, for Oper Chat,
CHATOPS was invented. IRCops with the +c flag enabled will be able to send/receive CHATOPS messages.

Syntax: CHATOPS Example: CHATOPS How's everyone doing today?


*** LOCOPS Command ***

Similar to GLOBOPS, except only received by those IRCops local to your server.

Syntax: LOCOPS Example: LOCOPS Going to be adding a temp k:line for that user...


*** ADCHAT Command ***

This command sends to all Admins online
Only for Admins. This is a ChatOps style command

Syntax: ADCHAT Example: ADCHAT Hey guys!


*** NACHAT Command ***

This command sends to all NetAdmins & TechAdmins online
Only for Net/Techadmins. This is a ChatOps style command

Syntax: NACHAT Example: NACHAT Hey guys!


*** TECHAT Command ***

This command sends to all TechAdmins online
Only for Net/Techadmins. This is a ChatOps style command

Syntax: TECHAT Example: TECHAT Hey guys!

*** KILL Command ***

Forcefully Disconnects a user from an IRC Server.
IRC Operators only.

Syntax: KILL Example: KILL Clone5 Cloning is not allowed


*** KLINE Command ***

"Bans" a hostmask from connection to the IRC server.
The user can however connect to other servers on the network !!
IRC Operators only.

Syntax: KLINE Example: KLINE *@*.aol.com Abuse


*** UNKLINE Command ***

Removes a k:line from the server.
IRC Operators only.

Syntax: UNKLINE Example: UNKLINE *@*.aol.com


*** ZLINE Command ***

Disables all access to the IRC server from a specified IP.
The IP can however connect to other servers on the network !!
IRC Operators only.

Syntax: ZLINE :reason
Example: ZLINE 127.0.0.1 :Localhost


*** UNZLINE Command ***

Removes a currently active z:Line.
IRC Operators only.

Syntax: UNZLINE Example: UNZLINE 127.0.0.1


*** GLINE command ***

This command provides timed G:Lines. If you match
a G:Line you cannot connect to ANY server on the
IRC network. A time of 0 in the GLINE makes it permanent (Never Expires).
In Unreal 3.1.1 you may also specify the time in the format 1d10h15m30s.
IRC Operators only.

Syntax: GLINE : (Adds a G:line for user@host)
GLINE - (Removes a G:line for user@host)
Example: GLINE *@*.dal.net 900 :Spammers (Adds a 15 min G:line)
GLINE *@*.dal.net 1d5h :Spammers (Adds a 29 hour G:line)


*** SHUN Command ***

Prevents a user from executing ANY command except ADMIN and respond to Server Pings.
This effectively prevents them from doing anything on the server.
A time of 0 on the SHUN makes it permanent (Never Expires).
In Unreal 3.1.1 you may also specify the time in the format 1d10h15m30s.
IRC Operators only.

Syntax : SHUN : (Shun the nickname for time)
SHUN + : (Shun the user@host for time)
SHUN - (Removes the SHUN for user@host)
SHUN (View the current SHUN list)

Example : SHUN +foobar@aol.com 600 :Spamming (Shuns foobar@aol.com for 10 mins for Spamming)
SHUN +foobar@aol.com 1d6h :Spamming (Adds a 30 hour SHUN)


*** GZLINE Command ***

This command provides timed global Z:line. If you match a Global Z:Line you cannot
connect to ANY server on the IRC network
A time of 0 in the GZLINE makes it permanent (Never Expires).
You may also specify the time in the format 1d10h15m30s.
IRC Operator only command.

Syntax: GZLINE : (Adds a Global Z:line for user@host)
GZLINE - (Removes a Global Z:line for user@host)
Example: GZLINE *@*.dal.net 900 :Spammers (Adds a 15 min Global Z:line)
GZLINE *@*.dal.net 1d5h :Spammers (Adds a 29 hour Global Z:line)


*** TKLINE Command ***

This command provides timed K:Lines. If you match a time K:Line you cannot
connect to the server until the time has expired
A time of 0 in the TKLINE makes it permanent (Never Expires).
You may also specify the time in the format 1d10h15m30s.
IRC Operator only command.

Syntax: TKLINE : (Adds a Timed K:line for user@host)
TKLINE - (Removes a Timed K:line for user@host)
Example: TKLINE *@*.dal.net 900 :Spammers (Adds a 15 min Timed K:line)
TKLINE *@*.dal.net 1d5h :Spammers (Adds a 29 hour Timed K:line)


*** TZLINE Command ***

This command provides timed G:Lines. If you match a Timed Z:Line you cannot
connect to the server until the time has expired
A time of 0 in the TZLINE makes it permanent (Never Expires).
You may also specify the time in the format 1d10h15m30s.
IRC Operator only command.

Syntax: TZLINE : (Adds a Timed Z:line for user@host)
TZLINE - (Removes a Timed Z:line for user@host)
Example: TZLINE *@*.dal.net 900 :Spammers (Adds a 15 min Timed Z:line)
TZLINE *@*.dal.net 1d5h :Spammers (Adds a 29 hour Timed Z:line)


*** AKILL Command *** (Use Services AKILL Instead)

Adds an Autokill for the specific host mask. This prevents any user from that
hostmask from connecting to the network.
Services Admin & above only ..

Syntax : AKILL : Example : AKILL foo@aol.com :Spammers!


*** RAKILL Command *** (Use Services AKILL Instead)

Removes an AKILL set by an IRC Operator or Services.
Services Admin & above only ..

Syntax : RAKILL *** REHASH Command ***

Prompts the server to reread the configuration files.
IRC Operators only.

Syntax: REHASH - REHASH - If servername and flags are not specified this rehashes the ircd.conf , removing
any temporary k:lines.
If servername is specified, this is used to rehash config files on servername
Only TechAdmins and NetAdmins may specify a server name


The flags are used to rehash other config files, valid flags are:
-dccdeny - Rehashes dccdeny.conf
-dynconf - Rehashes UnrealIRCd Config and Network file
-restrict - Rehashes chrestrict.conf
-vhost - Rehashes vhost.conf
-motd - Rehashes all MOTD files and RULES files (including T:lines)
-opermotd - Rehashes the OPERMOTD
-botmotd - Rehashes the BOTMOTD
-garbage - Force garbage collection
-badwords - Rehashes the badwords config.


*** RESTART Command ***

Kills and restarts the IRC daemon, disconnecting all users currently on that server.
IRC Operators only.

Syntax: RESTART
RESTART RESTART *** DIE Command ***

Kills the IRC daemon, disconnecting all users currently on the current server.
IRC Operators only.

Syntax: DIE
DIE *** LAG Command ***

This command is like a Sonar or Traceroute for IRC servers
You type in /LAG irc.fyremoon.net and it will
reply from every server it passes with time and so on
Useful for looking where lag is and optional TS future/past travels

Syntax: LAG *** SETHOST Command ***

This command is so you can change your
Virtual host (hiddenhost) to everything you want to,
Except special characters.
IRC Operators only.

Syntax: SETHOST Example: SETHOST microsoft.com


*** SETIDENT Command ***

With this command you can change your Ident (username).
IRC Operators only.

Syntax: SETIDENT Example: SETIDENT root


*** CHGHOST Command ***

Changes the hostname of a user currently on the IRC network.
IRC Operators only.

Syntax: CHGHOST Example: CHGHOST hAtbLaDe code.slashdot.org


*** CHGIDENT Command ***

Changes the ident of a user currently on the IRC network.
IRC Operators only.

Syntax: CHGIDENT Example: CHGIDENT hAtbLaDe FreeBSD


*** CHGNAME Command ***

Changes the "IRC Name" (or "Real Name") of a user currently on the IRC network.
IRC Operators only.

Syntax: CHGNAME Example: CHGNAME hAtbLaDe TechAdmin on SomeNet


*** SQUIT Command ***

Disconnects an IRC Server from the network
IRC Operators only.

Syntax: SQUIT Example: SQUIT leaf.*


*** CONNECT Command ***

Links another IRC server to the one you are currently on. Remote connections are also
possible.
IRC Operators only.

Syntax: CONNECT CONNECT Example: CONNECT leaf.*
CONNECT hub.* 6667 leaf.*


*** DCCDENY Command ***

Adds a DCC Deny for that filename mask. This means that any DCC sends of that filename mask
through the server will be rejected.
IRC Operators only.

Syntax : DCCDENY *** UNDCCDENY Command ***

If the EXACT file you type is found it is removed, else it uses wildcards to search
IRC Operators only.

Syntax : UNDCCDENY *** SAJOIN Command ***

Forces a user to join channel(s). Can only be used by a Services Admin.

Syntax: SAJOIN [,..]
Example: SAJOIN hAtbLaDe #OperHelp
SAJOIN hAtbLaDe #Support,#IRCHelp


*** SAPART Command ***

Forces a user to leave channel(s). Can only be used by a Services Admin.

Syntax: SAPART [,..]
Example: SAPART hAtbLaDe #OperHelp
SAPART hAtbLaDe #Support,#IRCHelp


*** SAMODE Command ***

Allows a Services Administrator to change the mode on a channel,
without having Operator status.

Syntax: SAMODE Example: SAMODE #Support +m


*** RPING Command ***

This will calculate the milliseconds (Lag) between server

Syntax: RPING *** TRACE Command ***

TRACE is useful to know what servers are connected to
what. Sometimes TRACE can be confusing, especially if you are using
it for the first time.

Syntax: TRACE Example: TRACE irc.fyremoon.net


*** OPERMOTD Command ***

Shows the IRCd Operator MOTD
IRC Operators only.

Syntax: OPERMOTD


*** ADDMOTD Command ***

This will add the text you specify to the MOTD
(the general motd - T:lines doesnt count ..)
Server Admin & Co-Admin only

Syntax: ADDMOTD :text


*** ADDOMOTD Command ***

This will add the text you specify to the Operator MOTD
Server Admin & Co-Admin only

Syntax: ADDOMOTD :text


*** SDESC Command ***

With this command you can change your Server Info Line
Without having to squit and reconnect.
This is a Server Admin/Co Admin only command

Syntax: SDESC Example: SDESC If you belong to me..


*** MKPASSWD Command ***

This command will encrypt the string it has been given
So u can add it directly to the unrealircd.conf if you use
Encrypted passwords. Type can be crypt, sha1, or md5. Sha1
and md5 are only available when compiled with SSL support.

Syntax : MKPASSWD *** TSCTL Command ***

This is a highly advanced command
IRC Operators only.

Syntax: TSCTL OFFSET +|- (Adjust internal IRC clock)
TSCTL TIME (Will give TS report)
TSCTL ALLTIME (Shows the TS report of all Servers)
TSCTL SVSTIME (Sets the Time on all servers)


*** HTM Command ***

Switches the server In & Out of High Traffic Mode
It is activated when the server is receiving extremely high amounts of information
IRC Operators only.

Syntax: HTM [option]

If no option is specified it just displays the current HTM state
If an option is specified it does a more specific task, valid options are:

ON - Force HTM to activate
OFF - Force HTM to deactivate
NOISY - Make HTM announce when it is entering/leaving HTM
QUIET - Stop HTM from announcing when it is entering/leaving HTM
TO - Tell HTM at what incoming rate to activate HTM

Joined: Sat May 30 2009, 04:30PM
Posts: 37

you people have too many gd commands >.>

Joined: Thu Oct 29 2009, 10:02PM
Posts: 101

this is only a sample sk68 .. there is the SVS commands also :)

Joined: Sun Feb 15 2009, 04:48PM
Posts: 541

there is ALOT more commands actually, im just lazy. if anyone is looking for oper commands in a menu, do a search for "services" in the snippet section.

Joined: Thu Oct 29 2009, 10:02PM
Posts: 101

Adding Global

# GLOBAL

Syntax: /msg OperServ GLOBAL message

Allows IRCops to send messages to all users on the network.
The message will be sent from the nick OperServ.

note - a responsible oper will only use this to send important server wide info (eg if there has been a spambot posting malicious links and you wish to alert the regular members to be careful)
mis-use of this command will 9 times out of 10 lead to your oper priviledges being revoked and removed.